A slow drain is a warning. A backed-up main line is an emergency. We clear both, with a cable when that is all it takes, and with high-pressure hydro jetting when grease, sludge, or roots need to be scoured off the pipe walls.
For a single slow or stopped fixture, a properly sized cable punches through the clog and gets you running again the same visit. It’s the fast, straightforward fix, and when a cable is all it takes, that’s all we use.
A cable opens the line back up. High-pressure water goes further: it cuts grease, sludge, scale, and roots off the pipe wall and flushes them out, leaving the line closer to its full diameter. That is why jetted drains usually stay open much longer than snaked ones.
Where the trouble shows up tells you how serious it is. One slow sink is a local clog. Several fixtures acting up at once usually means the main line.
We start by asking what’s been happening and checking which fixtures are backing up, so we know whether it’s one drain or the main line before we pick the right tool.
Cable or jetter, whichever the line actually needs. The goal is to get it flowing right, not just poke a hole through the clog.
If a clog keeps coming back, a camera inspection shows us why. You’ll watch it on the screen with us, and we can send you the video, so you can fix the real problem instead of clearing it every few months.